≪ Dust-free and anti-static synchronous belt for steel mesh, three-layer conveyor, capable of transporting two steel meshes to switch between two printing press steel meshes; screw lifting, stable structure; laser SLAM navigation, equipped with ultrasonic sonar reversing detection
This product is a stencil handling AGV, which can easily switch between the old and new stencils of the printing press, and between the stencil after cleaning and the printing press. The system calls for automatic switching.
category | Product Parameters |
Device Name | Steel mesh handling AGV |
Device Model | CGV-200M |
Equipment size (mm) | 810L*860W*1130Hmm |
Steel mesh size ( mm ) | 730-730-30 |
Rated load (kg) | 20 |
Running speed (m/s) | 1.2 |
Navigation accuracy (position/angle deviation) (mm/°) | ± 1 0/±2 |
QR code docking accuracy (position/angle deviation) (mm/°) | ± 2 /±1 |
Bottom roller lifting range (mm) | 800-1070mm |
Layer spacing (mm) | 105 |
Net space per floor (mm) | 45 |
Charging time (h) | ≤2 |
Battery life ( h) | ≥8 |
Battery type and capacity | Lithium iron phosphate battery, 48V 24 Ah |
Number of charge and discharge cycles | Maximum number of full charge and discharge times: 2000 times |
Passability | Climbing slope ≤5°; step ≤10mm; clearance ≤15mm |
Drive mode | Differential driving |
Driving direction | Go forward, turn left, turn right |
Boot method | Laser SLAM navigation |
Anti-collision method | Front: 30m LiDAR (180°) + near-ground anti-collision strip Rear: near-ground ultrasonic sensor |
Communication method | Wi-Fi 2.4G/5G |